Fiber-Fab  World Class Tubs & Showers Fiber-Fab  World Class Tubs & Showers

ASSISTED LIVING  |  SHOWERS  |  SHOWERS / TUBS  |  MODULARS

 

11. Models 63H1NRO, 63H2NRO, 63BFNRO
Roll-In/Transfer Shower
ADA
Compliant

Fiber-Fab Model 63H1NRO, 63H2NRO, 63BFNRO

Color: White
Ext. Dim:
63" W x 37-1/2" D x 79-1/2" H
Weight:
160 Lbs. ± 10 Lbs
Material:
Gelcoat
Warranty:
10 Year Limited Warranty

Standard Features

1.

Meets Federal ADA requirements when installed correctly

2.

One-piece construction allows for easy installation

3.

Sandwich-Wall Construction

4.

Sanitary Ware Gel Coat

5.

Full-width soap and shampoo ledge across the back wall

6.

Anti-slip floor provides added safety (meets ASTM -462)

7.

Clear floor space is 60" X 31-1/4"

8.

No recess bottom

Optional Features

Pre-installed through-bolted curtain rod

Removable threshold

Pre-installed through-bolted flangeless grab bar(s)

Pre-installed four-legged fold-down seat

Barrier-free ramps

Barrier-free splash guard

Dimensional Tolerance ± ¼". Dimensions needed for site preparation should be measured from the unit.

ARCHITECTURAL SPECIFICATIONS

Models 63H1NRO, 63H2NRO, 63BFNRO

The unit shall be constructed of two layers of fiber reinforced composite, separated by a non-organic, polyester core. No wood, cardboard, or other non-polyester core material is permitted as part of the fiberglass assembly. This unit shall conform to ANSI Z124.2. An extra belt of reinforcement will be applied around the lower walls for maximum rigidity and durability. All laminate shall have a minimum of 18% glass content with no more than 35% calcium sulfate added to ensure fire retardation. A composite support plate shall be laminated to the bottom of the structure for added strength. No wood coring is permitted for bottom support. The specified finish of the fixture shall be 100% isothalic sanitary grade Gelcoat with a minimum dry thickness of 15 mills.

Unit shall comply with ADA and Standard Consumer Safety Specification ASTM-462 for slip-resistant bathing facilities.

Model 63H1NRO: Features a fold-down seat with phenolic seat and stainless steel support tubing, as well as a 1¼" diameter “L” shaped stainless steel grab bar. Please specify Left- or Right-hand plumbing.

Model 63H2NRO: Includes a full wrap-around 1¼" diameter stainless steel grab bar.

Model 63BFNRO: Is a barrier-free shower stall without bar or seat option and is ADA ready.*

* Revised ADA guidelines allow the installation of a barrier-free shower (no seat and no bar) provided the seat and grab bar can be added later. The two-legged or the four-legged fold-down seat may be installed after the initial construction.

A 8"x 8" area must be blocked out around the drain to allow the drain to sit below the subfloor.

No Recess Option: Available only on Fiber-Fab’s 63" Roll in Shower, designated as “NRO” after the model number. i.e.; 63H1NRO
In applications where recessing or Chip Crete overlay is impractical, Fiber-Fab’s “No Recess” option is the logical choice. The diagram below illustrates the ¼" lip that sits on the floor transitioning to a molded in ramp that rises up at a rate of 2 to 1. This rise is allowed under ADA and ANSI. This unit is glued directly to the sub-floor and the ¼" lip is either feathered back into the sub-floor, or an overlay of tile or other¼" material is applied. The best applications are on existing concrete floors, post tension concrete, or other places where curb height is crucial but recessing is impossible or impractical. Check with local code officials on the ADA and ANSI compliance of this model.
 


 M
odels 63H1NRO, 63H2NRO, 63BFNRO
          Click here for a product submittal sheet (PDF)
 
Recent Projects  |  Fiber-Fab Submittal Sheets  |  Low Profile Installation  |  Fiber-Fab Warranty  |  FAQs  |  Sitemap  |  Contact

© Fiber-Fab. All rights reserved.

  QAI Labratories - Certification, Testing, Inspection