Fiber-Fab  World Class Tubs & Showers Fiber-Fab  World Class Tubs & Showers



3. Models 40H1KD, BFKD
Transfer Modular Shower
ADA Compliant

Fiber-Fab Models 40H1KD, BFKD

Color: White
Ext. Dim:
38" W x 38-1/4" D x 76-5/8" H
150 Lbs. 10 Lbs
10 Year Limited Warranty

Standard Features


Meets Federal ADA requirements when installed correctly.


Four-piece construction allows for easy installation in remodeling applications


Sandwich-Wall Construction


Sanitary Ware Gel Coat


Anti-slip floor provides added safety (meets ASTM -462)


Clear floor space is 36-1/4" x 36"

Optional Features

Low Profile bottom

Pre-installed through-bolted curtain rod

Stainless steel, recessed soap dish

Removable threshold

Pre-installed through-bolted flangeless grab bar(s)

Pre-installed four-legged fold-down seat

Barrier-free ramp

Barrier-free splash guard

Dimensional Tolerance ". Dimensions needed for site preparation should be measured from the unit.


Models 40H1KD, BFKD

The unit shall be constructed of two layers of fiber reinforced composite, separated by a non-organic, polyester core. No wood, cardboard, or other non-polyester core material is permitted as part of the fiberglass assembly. This unit shall conform to ANSI Z124.2. An extra belt of reinforcement will be applied around the lower walls for maximum rigidity and durability. All laminate shall have a minimum of 18% glass content with no more than 35% calcium sulfate added to ensure fire retardation. A composite support plate shall be laminated to the bottom of the structure for added strength. No wood coring is permitted for bottom support. The specified finish of the fixture shall be 100% isothalic sanitary grade Gelcoat with a minimum dry thickness of 15 mills.

Unit shall comply with ADA and Standard Consumer Safety Specification ASTM-462 for slip-resistant bathing facilities.

Model 40H1KD: Feature a fold down seat with phenolic seat, 1" diameter L shape stainless steel grab bar, and 18" vertical grab bar on the entry way as shown in the picture above. Please specify left hand or right hand plumbing*

*Because the 40H1KD is a transfer shower, the ADA guidelines allow a half-inch threshold.

Model 40BFKD: Is ADA ready, but it does not include a seat or bar. The seat and bar can be added at a later time for ADA compliance.**

** Revised ADA guidelines allow the installation of a barrier-free shower (no seat and no bar) provided the seat and grab bar can be added later. The two-legged or the four-legged fold-down seat may be installed after the initial construction. Additional backing is required for the fold-down seat; the backing may be added upon request during initial construction or reinforcement may be added after construction.

Low Profile Option: This option brings the threshold height on the model
40H1KD transfer shower to 5/8".

However, a 14" X 14" area must be blocked out around the drain to allow the drain to sit below the subfloor.


Models 40H1KD, BFKD
          Click here for a product submittal sheet (PDF)

Recent Projects  |  Fiber-Fab Submittal Sheets  |  Low Profile Installation  |  Fiber-Fab Warranty  |  FAQs  |  Sitemap  |  Contact

Fiber-Fab. All rights reserved.

  QAI Labratories - Certification, Testing, Inspection