Fiber-Fab’s 3-piece 60" Luxury Shower Stall comes with a molded seat on the left side. The shower head can be plumbed on the left, right, or both sides. Large, bi-level, self-draining soap ledges span the entire back wall. The standard non-skid floor provides added safety.

Standard Features

1. Extra-heavy-duty construction

2. Composite supporting plate

3. Never leaks or rusts; chip-resistant

4. Stain-resistant gel-coated finish that cleans like magic

5. Warm to the touch

6. Ready-to-plumb construction makes installation easy and quick

7. Ample soap ledges

8. Anti-slip floor (meets ASTM -462)

9. Target weight =162±10 pounds

Optional Features

• Factory-installed hydro-massage spa package

• Factory-installed through-bolted curtain rod

• Factory-installed and pre-plumbed pressure-balancing mixing valve

• Additional factory-installed through-bolted flangeless grab bar(s)

• Tempered glass enclosures

• Wide selection of contemporary colors

Model 60KD

The unit shall be constructed of two layers of fiber reinforced composite, separated by a non-organic, polyester core. No wood, cardboard, or other non-polyester core material is permitted as part of the fiberglass assembly. This unit shall conform to ANSI Z124.2. All laminate shall have a minimum of 18% glass content with no more than 35% calcium sulfate added to ensure fire retardation. A composite support plate shall be laminated to the bottom of the structure for added strength. No wood coring is permitted for bottom support. The specified finish of the fixture shall be 100% isothalic sanitary grade Gelcoat with a minimum dry thickness of 15 mills.