Fiber-Fab  World Class Tubs & Showers Fiber-Fab  World Class Tubs & Showers

ASSISTED LIVING  |  SHOWERS  |  SHOWERS / TUBS  |  MODULARS

 

7. Models 60H1KD, H2KD, BFKD
Roll-In/Transfer Shower

 

Fiber-Fab Models 60H1KD, H2KD, BFKD

Color: White
Ext. Dim:
60" W x 373/8" D x 79" H
Weight:
170 Lbs. 10 Lbs
Material:
Gelcoat
Warranty:
10 Year Limited Warranty

Standard Features

1.

Three-piece construction allows for easy installation

2.

Sandwich-Wall Construction

3.

Sanitary Ware Gel Coat

4.

Full-width soap and shampoo ledge across the back wall

5.

Anti-slip floor provides added safety (meets ASTM -462)

6.

Clear floor space is 56-3/8" x 31-1/4"

Optional Features

Low Profile bottom

Pre-installed through-bolted curtain rod

Removable threshold

Pre-installed through-bolted flangeless grab bar(s)

Pre-installed four-legged fold-down seat

Barrier-free ramp

Barrier-free splash guard

Dimensional Tolerance ". Dimensions needed for site preparation should be measured from the unit.

ARCHITECTURAL SPECIFICATIONS

Models 60H1KD, H2KD, BFKD

The unit shall be constructed of two layers of fiber reinforced composite, separated by a non-organic, polyester core. No wood, cardboard, or other non-polyester core material is permitted as part of the fiberglass assembly. This unit shall conform to ANSI Z124.2. An extra belt of reinforcement will be applied around the lower walls for maximum rigidity and durability. All laminate shall have a minimum of 18% glass content with no more than 35% calcium sulfate added to ensure fire retardation. A composite support plate shall be laminated to the bottom of the structure for added strength. No wood coring is permitted for bottom support. The specified finish of the fixture shall be 100% isothalic sanitary grade Gelcoat with a minimum dry thickness of 15 mills.

Unit shall comply with OAR Chapter 411, Division 55 and 56 and Standard Consumer Safety Specification ASTM-462 for slip-resistant bathing facilities.

Model 60H1KD: Includes a fold-down phenolic seat with stainless steel support tubing, as well as a 1 " diameter L shaped stainless steel grab bar. Please specify Left- or Right-hand plumbing.

Model 60H2KD: Includes a full wrap-around 1" diameter stainless steel grab bar.

Model 60BFKD: Is a barrier-free shower stall without bar or seat option.

Low Profile Option: This option brings the threshold height on the model 60KD transfer shower to 1".

However, a 8" X 8" area must be blocked out around the drain to allow the drain to sit below the subfloor.

 


Models 60H1KD, H2KD, BFKD
          Click here for a product submittal sheet (PDF)
 

Recent Projects  |  Fiber-Fab Submittal Sheets  |  Low Profile Installation  |  Fiber-Fab Warranty  |  FAQs  |  Sitemap  |  Contact

Fiber-Fab. All rights reserved.

  QAI Labratories - Certification, Testing, Inspection