Fiber-Fab  World Class Tubs & Showers Fiber-Fab  World Class Tubs & Showers



8. Models 60H1, H2, BF
Roll-In/Transfer Shower


Fiber-Fab Models 60H1, H2, BF

Color: White
Ext. Dim:
60" W x 37" D x 79 " H
157 Lbs. 10 Lbs
10 Year Limited Warranty

Standard Features


One-piece construction allows for easy installation


Sandwich-Wall Construction


Sanitary Ware Gel Coat


Full-width soap and shampoo ledge across the back wall


Anti-slip floor provides added safety (meets ASTM -462)


Clear floor space is 57-1/8" x 31"

Optional Features

Low Profile bottom

Pre-installed through-bolted curtain rod

Stainless steel, recessed soap dish

Removable threshold

Pre-installed through-bolted flangeless grab bar(s)

Pre-installed four-legged fold-down seat

Barrier-free ramp

Barrier-free splash guard

Fiber glass top available

Dimensional Tolerance ". Dimensions needed for site preparation should be measured from the unit.


Models 60H1, H2, BF

The unit shall be constructed of two layers of fiber reinforced composite, separated by a non-organic, polyester core. No wood, cardboard, or other non-polyester core material is permitted as part of the fiberglass assembly. This unit shall conform to ANSI Z124.2. An extra belt of reinforcement will be applied around the lower walls for maximum rigidity and durability. All laminate shall have a minimum of 18% glass content with no more than 35% calcium sulfate added to ensure fire retardation. A composite support plate shall be laminated to the bottom of the structure for added strength. No wood coring is permitted for bottom support. The specified finish of the fixture shall be 100% isothalic sanitary grade Gelcoat with a minimum dry thickness of 15 mills
Unit shall comply with OAR Chapter 411, Division 55 and 56 and Standard Consumer Safety Specification ASTM-462 for slip-resistant bathing facilities.

Model 60H1: Features a fold-down phenolic seat with stainless steel support tubing, as well as a 1 " diameter L shaped stainless steel grab bar. Please specify Left- or Right-hand plumbing.

Model 60H2: Includes a full wrap-around 1 " diameter stainless steel
grab bar.

Model 60BF: Is a barrier-free shower stall without bar or seat option.

Low Profile Option: This option brings the threshold height on the model 60" transfer shower to 1".

However, a 8" X 8" area must be blocked out around the drain to allow the drain to sit below the subfloor.


Models 60H1, H2, BF
          Click here for a product submittal sheet (PDF)

Recent Projects  |  Fiber-Fab Submittal Sheets  |  Low Profile Installation  |  Fiber-Fab Warranty  |  FAQs  |  Sitemap  |  Contact

Fiber-Fab. All rights reserved.

  QAI Labratories - Certification, Testing, Inspection