Standard Features

1. Composite supporting plate

2. Never leaks or rusts; chip-resistant

3. Stain-resistant gel-coated finish that cleans like magic

4. Warm to the touch

5. Ready-to-plumb construction makes installation easy and quick

6. Anti-slip floor (meets ASTM -462)

7. Acrylic grab bar

One-piece shower stall with optional top includes acrylic grab bar and soap ledges across the back wall. Specify with or without top.

Note: Also available in simulated tile
(Model 36TC)

Optional Features

• Factory-installed through-bolted curtain rod

• Factory-installed and pre-plumbed pressure-balancing mixing valve

• Additional factory-installed through-bolted flangeless grab bar(s)

• Tempered glass enclosures

• Wide selection of contemporary colors

• Fold-down seat

• Fiber glass top available

Models 36C, 36TC
The unit shall be constructed of two layers of fiber reinforced composite with composite stringers or stiffeners inserted between the two layers of composite for added stiffness and rigidity. No wood, card board, foam or other non polyester resin based products are allowed as core material. The unit shall conform to ANSI Z124.2 and be listed by an accredited listing agency to assure compliance. All laminate shall have no less than 18% glass content and contain no more than 35% calcium sulfate filler to assure the fixture is fire retardation. A composite support plate shall be laminated to the bottom of the fixture for added support and strength. No wood coring is permitted in the bottom of the fixture. The specified finish of the unit shall be 100% isothalic sanitary grade gel coat with no less than 15 mills dry thickness.